SADJ has been in contact with IDEAS Media Manager Ehtesham Bari for many years, planning to attend the IDEAS show in Karachi. We missed the 2008 show due to some issues with travel restrictions and the 2010 show had been unfortunately canceled due to the flooding tragedy. It was exciting to finally be able to set up at the show, and LMO’s Chief Armorer Instructor Matt Babb, Jason M. Wong from Hurricane Butterfly and I set out for Karachi to man the booth, explore the show, and then travel north to Islamabad and the Pakistan Ordnance Factories at Wah Cannt, and the Khyber Pass region.
TOP: German interwar period paperweight or desk ornament. 6-inch long silver German Maxim MG08 with Z.F. 12 optical sight mounted on a prone sled mount…
The U.S. State Department “Eats Their Own Young:” The Basics of Mens Rea, Specific Intent, and Acting “Knowingly” American criminal legal theory is based upon…
Bullseye Camera System Announce Remote Targeting Viewing The Bullseye Camera System is a unique patent-pending system that allows a shooter to view his downrange target…
ATF Import Permits Officially Changed to 2-Year Period of Validity On February 7, 2014, ATF announced via the Federal Register that it would extend the…
ABOVE: Germans with Maxim MG08. Judging from their cloth-covered spiked helmets, this apparently posed photo was taken early in the war when quantities of their…
SchleTek, a German chemical company operating throughout Europe, has recently offered a line of premium gun care products. Our evaluation of this product was taken on with a degree of enthusiasm – as most things German are expected to be outstanding – and we were not disappointed with the outcome. We only tested four of the nine products offered to get a feel for the performance of these chemicals. We were impressed with the four products we tested and assume that the others we did not test will be equally impressive.
The fourth biannual BRIDEX (pronounced Brih-dex) exhibition was another marked success for this small South East Asian nation on the northern tip of the island of Borneo. While a relatively small regional show, it drew a solid representation of buyers and vendors in the region, reaching all the way to Africa and the Mideast. The U.S. and UK were well represented as were other European nations. In some ways this event was a bit smaller in scale than the last, but the floors were packed with VIPs who engaged with the vendors, and that’s what counts.
Throughout the industry there are numerous combination tools for the AR-15/M16-series rifle. Most of them are not what you would consider to be armorer combination tools. They are mostly combination tools for cleaning such as the eFECT maintenance tool, Multi Tasker and the Samson Field Survivor to name just a few. These will often contain sight adjustment tools, firing pin retainer pin removal tool, carbon cleaning tools, punch, scraper and screw driver for optics. Some also will come with a broken shell extractor as well as cleaning brushes and or cables. None of these were intended for repair but just field cleaning.
The key to reliability with any auto loading firearm is the feeding device whether it is a magazine, clip, belt or whatnot; the buck stops at the feeding mechanism front door. Over the last several years the industry has produced many different magazines for the black rifle. With the popularity of the rifle there simply wasn’t enough to go around as the demand was overwhelming. On the other side, there have been numerous attempts and some successful endeavors to improve greatly upon the standard aluminum GI magazine. Though not the first to produce a polymer AR magazine, Magpul has revolutionized the way we feed the black rifle. Earlier attempts to make a durable polymer magazine met with disaster. Magpul’s introduction of the PMag set a new standard, not only for polymer magazines but for the AR magazine in general.
A large group of friends and family gathered today at the front of the old MOD Pattern Room at Enfield Lock, England, for the dedication of a plaque honoring the life and contributions of Herbert J. “Bertie” Woodend, the former Curator of the famous MOD Pattern Room in England. This is one of the largest collections of military small arms in the world, and starting in 1966 “Herbie” was the driving force at Enfield Lock and later in the 1980s-90s at Royal Ordnance in Nottingham, until the Pattern Room was moved over to the Royal Armouries in Leeds in 2002. The collection is now the core of the National Firearms Centre at the Royal Armouries.
During its history, Romania was occupied by Turks, Austrians, Greeks and Russians. The principality of Moldavia and Walachia were acquired in 1861. Romania was an ally of Russia during its war against Turkey in 1877 and became independent one year later. Allied with Greece and Serbia, Romania fought against Bulgaria in 1913. In 1916, it entered in the Great World War beside the Allies. Between the two world wars, Romania was member of several alliances with other Balkan or Central European countries. The king renounced the throne in 1940, after a coup d’état organised by officers favourable to the Axis. So Romania, allied with Germany, entered the war against the Soviet Union in 1941. In 1944, the situation reversed after an insurrection managed by the communists.
The 18th Worldwide Exhibition of Internal Security was held in Paris from November 19 to 22, 2013. There were 915 exhibitors from all over the…
It is nice to see a product evolve over time. The ArmaLite AR-31 .308 Win rifle is a great case in point. The AR-31 shares its design lineage
with previous ArmaLite precision rifles in the form of the AR-30 and its updated version AR-30A1. The AR-30A1 rifle is chambered in “long
action” bolt cartridges such as .300 WinMag and .338 Lapua. The AR-31 takes the no nonsense ArmaLite concept of the tactical rifle another
step forward. While the AR-31 (and AR-30A1) may resemble its AR-30 predecessor, only the pistol grip, buttpad, trigger, and a few small
components from the original AR-30 transferred over to the AR-31. All other components are new or redesigned. This is especially true with
the AR-31’s bolt action. The AR-31’s “short action” describes the length the bolt needs to travel to function/cycle the .308Win cartridge.
The longer .300 WinMag and .338 Lapua cartridges require a “long action.” The AR-31’s shorter action provides for a stiffer receiver often
translating into better accuracy.
In January of 1990 a new cartridge hit the market that would pretty much be a game changer as to the cartridge preferred by law enforcement. The product of a joint effort between Smith & Wesson and Winchester would spawn the .40 S&W cartridge. The .40 caliber cartridges roots go back to the 10mm Auto cartridge when it was tested by the FBI as a potential replacement for their 9x19mm caliber pistols and .38 Special/.357 Magnum caliber revolvers. When tested, the FBI found two major problems with the 10mm Auto caliber firearm. First was the heavy recoil and second was that the current pistols did not hold up to the potent round. Due to the power it was difficult if not impossible to make a small compact version of the pistol. What if you could make a 10mm Short? Reduce the powder charge to make recoil manageable and shorten the overall length of the 10mm cartridge so it will fit in a 9x19mm size magazine/mid size pistol frame? Thus, here is the introduction of the .40 S&W. The first defensive cartridges in this new caliber were Winchester 180 grain jacketed hollow points.
From 1990 to very recently, the ROK (Republic of Korea; or South Korea) army had a tendency to reduce the presence of 7.62mm NATO light or medium machine guns. From the 1970s to 1990, the South Korea military used M60 GPMGs as their ‘almost universal’ machine gun; first supplied from the U.S. as military support when the ROK military dispatched a considerable number of troops to Vietnam and then manufactured under license by Daewoo Precision Industry, Co. (today’s S&T Motive). It was used everywhere machine guns were used: infantry, vehicle mounted, helicopter mounted, etc. Since the ROK military was heavily influenced under U.S. doctrine, it was quite natural and that influence led to the development of the K3 SAW (Squad Automatic Weapon), since the U.S. Army used the M249 SAW from the 1980s. The K3 is the ‘Koreanized’ version of the famous Minimi, and the role of K3 in ROK Army/Marine Corps was initially quite similar to that of the M249 in U.S. military.
The Defence Security Equipment International (DSEI) 2013 exhibition was held in the London Docklands ExCeL Exhibition Centre on September 10-13, 2013. It is a bi-annual event, held in the autumn to avoid conflict with the other major international defence exhibitions such as IDEX in Abu Dhabi held earlier in the year and Eurosatory in Paris traditionally held the following year.
According to company literature, the first Glock pistols imported into the U.S. came in January of 1986. These guns had serial numbers beginning with a two letter alpha prefix of “AF” followed by a three digit number. This means for every two letter combination, there were up to 1,000 pistols produced with numbers from 000 to 999. As of this writing, current new production Glock….
After the end of the Second World War, the United States military, the Army especially, saw its mission as one of countering potential Soviet aggression. If this were to come, the most likely battlefield would be in Northern Europe. With the Soviet Union’s acquisition of nuclear weapons the two world powers settled into the Cold War. Though a major land war between the two in Europe would have been catastrophic, other fronts presented more potential. By supporting insurgencies around the world the Soviet Union….
Since it gained independence, Chad has been shaken by numerous armed risings, invasions of the neighboring military, conflicts regarding borders and scuffles among political leaders. Since 1973 the northern part of the country was placed under control of the guerrilla insurgents supported by Libya, but with French help the uprising was repressed and operations of Libyan troops were suppressed….