New Products: V8N1

FOBUS ANNOUNCES NEW HOLSTER FOR SELECT GLOCK MODELS


FOBUS ANNOUNCES NEW HOLSTER FOR SELECT GLOCK MODELS

First Samco, Inc. (FSI), the exclusive distributor of Fobus Holsters & Pouches, is proud to unveil the latest Fobus offering: the GL-26 Evolution polymer holster for the subcompact line of GLOCK models 26, 27, 28 and 33. It is available in paddle, belt and roto styles for both right and left-handed users. The Fobus Evolution Series holsters offer passive retention with an adjustment screw for customized retention based upon the user’s personal preference, ensuring that the user’s pistol stays firmly in place. Steel reinforced rivets secure the holster to your attachment of choice and further strengthen the overall integrity of the holster, ensuring years of reliable and trouble free use. The proven Fobus passive retention design makes for rapid one handed deployment and re-holstering. The proprietary rubber insert on the back of the paddle was designed to keep the holster from moving on the user while at the same time adding to the overall comfort of the holster. Check out their full line of innovative holsters at www.fobusholster.com.

FEDERAL ANNOUNCES AMERICAN EAGLE LINE OF SUPPRESSOR AMMUNITION

FEDERAL ANNOUNCES AMERICAN EAGLE LINE OF SUPPRESSOR AMMUNITION

As suppressed firearms have gained popularity not only for deployment but for competition, hunting and range use in recent years, Federal Premium Ammunition has turned down the volume without sacrificing performance with its lineup of American Eagle® Suppressor ammunition. Specifically designed for use in suppressed firearms, these subsonic rounds (available in .22 LR, 9mm, .45 Auto and 300 AAC Blackout) are priced for volume shooting and they give users an even more accurate, economical and enjoyable round of competition or day at the range. Federal American Eagle Suppressor ammunition delivers superior accuracy, reliability and cleanliness in suppressed firearms, thanks to carefully selected propellants, bullet weights and profiles. The subsonic loading for the 9mm, 45 Auto, 300 Blackout and 22LR not only lend themselves to better noise reduction through the suppressor itself, they also reduce it by avoiding the ballistic crack inherent to supersonic loads. In addition, special clean-burning powders make it easy for shooters to clean their weapons—other conventional ammunition can cause severe fouling in suppressed firearms. Visit them at www.federalpremium.com.

ASHBURY PRECISION ORDNANCE ADDS .408 AND .375 CHEYTAC CALIBERS

ASHBURY PRECISION ORDNANCE ADDS .408 AND .375 CHEYTAC CALIBERS

Ashbury Precision Ordnance (APO) Manufacturing has added two new calibers to its line of premium Asymmetric Warrior® (ASW) precision tactical rifles based on the new SABER® VX bolt action receiver. The SABER VX is Ashbury’s octagonal geometry precision manufactured bolt action receiver for super magnum .408 and .375 CheyTac calibers. The ASW-408 uses the latest innovation in the patented SABER®-FORSST® modular rifle chassis system (MRCS), an interlocking action/chassis design precision machined from aerospace grade aluminum alloy that requires no bedding and very little maintenance. ASW precision tactical rifles are comfortable to shoot and are purpose built to deliver high levels of consistent, down range accuracy now in calibers from .223 to 408CT. They feature tool-less ergonomic adjustability, heat/mirage management, rugged advanced materials construction, engineered accuracy enhancing design, and offer shooters considerably lower felt recoil especially with the big .375 and .408CT cartridges. The core of Ashbury’s ASW-408 platform is the precision CNC machined SABER VX bolt action receiver. This newly engineered octagonal geometry receiver is crafted to smoothly feed the long, powerful super magnum cartridges from a 7rd detachable box magazine. The fire control mechanism on the ASW-408 rifle is a fully adjustable two-stage trigger, set to a crisp 3 lbs. The ASW-408 is a rugged precision rifle platform designed to produce optimum accuracy with 395gr to 420gr projectiles and the ASW-375 with 325gr to 375gr projectiles. ASW barrel chambers and threaded muzzles are 2precisely machined to a straightness of less than <0.0002 of an inch, true to the center line of the barrel bore and VX receiver. ASW super magnum rifles use the exceptionally efficient EliteIron muzzle brake/suppressor adapter to manage recoil and employ the optional WindTalker sound suppressor. Either rifle may be ordered with the option of the APO Arklight muzzle brake to substantially reduce felt recoil to approximately the level of a .308 Win rifle without a muzzle brake. They can be reached at www.ashburyprecisionordnance.com.

ADAPTIVE TACTICAL ANNOUNCES NEW WRAPTOR ELITE SHOTGUN FOREND

ADAPTIVE TACTICAL ANNOUNCES NEW WRAPTOR ELITE SHOTGUN FOREND

Adaptive Tactical, LLC, manufacturers of innovative firearm stocks and accessories, proudly announces its new Wraptor Elite Forend for Remington and Mossberg pump action shotguns. The patented design of the Wraptor Elite Forend was specifically developed for Remington 870 and Mossberg 500, 88 & 590 pump action shotguns, transforming your standard shotgun into a versatile shooting platform for field or range tactics. The forend allows the user a comfortable, ambidextrous grip and the ability to add multiple accessories using the included tri-rail configuration. The Wraptor Elite Forend doubles as a heat shield and comes with an integrated patented “sight tunnel” allowing the user to rapidly attain a sight picture for faster target acquisition. The Wraptor Elite Forend currently c2omes in black only. The Wraptor Elite Forend is available separately for Remington 870 and Mossberg 500 & 88, 590 12 gauge shotguns at a price of only $49.99. The Wraptor Elite Forend also comes standard on Adaptive Tactical Venom Shotgun Conversion Kits. Contact them at www.adaptivetactical.com.

BATTLE RIFLE COMPANY INTRODUCES THEIR NEW BR4 TRIDENT RIFLE

BATTLE RIFLE COMPANY INTRODUCES THEIR NEW BR4 TRIDENT RIFLE

Battle Rifle Company is proud to introduce their latest edition, the BR4 Trident rifle. The BR4 Trident is the first rifle specifically designed for MARSEC (Maritime Security) operations and shipboard usage. Built and constructed for long lasting life in extreme weather conditions, the BR4 Trident is unlike any other rifle and suited perfectly for marine environments. Available with an 11.5” or 16” barrel, all major components of the BR4 Trident have a Hi-Temp Cerakote finish including the upper and lower receivers, buffer tube, forearm quad-rail and the front sight base. The rifle includes a 416S Stainless Steel Hi-Temp Cerakote finished cryogenically treated barrel with a 1:7 twist. It also comes with a stainless steel fire control group, nickel-boron M16 profile bolt carrier group, stainless steel pins and lower parts, stainless steel springs and a narrow comfort grip quad rail. All the components are coated with Nano Technology to ensure a water tight seal that prevents corrosion and rust due to wet environmental conditions. Careful consideration was given that no direct ferrous metal to metal contact was made throughout the entire rifle. The rifle comes in both semi and select fire models. You can get more information at www.battleriflecompany.com.

UTM INTRODUCES NEW 9MM UTX MARKER ROUND

UTM INTRODUCES NEW 9MM UTX MARKER ROUND

UTM continues to offer fully immersive, innovative and progressive training solutions to military, law enforcement, private sector, security personnel, and professional training organizations across the globe. The UTM System allows you to spend more time training without restrictions or limitations – revolutionizing and redefining training as you know it. UTM’s patented inertia technology (as opposed to bursting) allows even glancing shots to mark, providing more consistent and reliable hit identification during Force-on-Force exercises. The UTX Marker Round fires from existing Simunitions FX® 9mm conversions. The patented driving bands and dual primer system ensure that these are the most affordable & accurate FX® compatible marking round available today. They offer malfunction-free training, even after hundreds of rounds. The new ammunition has a shelf life of 5 years. UTM has more conversions and Non-Lethal Training Ammunition options than anyone else, with the highest rated overall system in reliability, accuracy and affordability. Be sure to check out all UTM products and training courses at www.utmworldwide.com.

KINETIC CONCEALMENT INTRODUCES NEW MINI-GREEN DOT LASER SIGHT

KINETIC CONCEALMENT INTRODUCES NEW MINI-GREEN DOT LASER SIGHT

Kinetic Concealment, known for their neoprene backed leather kydex hybrid holsters, has added to its product line-up by offering the new MG-01 Mini-Green Dot Laser Sight. The MG-01 is designed to be a low-cost high-quality green dot sight that can be mounted on any sub-compact pistol with a standard rail system. Operating off of a standard CR-123 battery makes the MG-01 not only cost effective, but less expensive to operate. With high-quality aluminum alloy construction and boasting a retail price point of only $79.99, the MG-01 is designed to be both durable and affordable. For more information go to www.kineticcealment.com.

MASTERPIECE ARMS REVEALS NEW BOLT ACTION SIDE FOLDING CHASSIS

MASTERPIECE ARMS REVEALS NEW BOLT ACTION SIDE FOLDING CHASSIS

MasterPiece Arms (MPA), manufacturers of the MPA BA Rifles, Chassis Systems, Defender Pistols and Carbines, Suppressors and MPAR Rifles, proudly announces the availability of its new MPA BA SF Chassis – Side Folder, part of the MPA Bolt Action Chassis Systems product line. This unique chassis system provides a super precision platform for the Remington 700, Savage, Howa and a variety of custom actions. The MPA BA SF Chassis – Side Folder provides a world class chassis and v-bedding system that aids in increasing accuracy capabilities while adding tactical features to a rifle. It is the ideal platform to use for building a super precision rifle for long range competitions. The v-bedding system is configured to allow for the ability to glass bed the action and straight section of the barrel, if desired. The MPA BA SF Chassis – Side Folder is machined on MPA’s CNC Horizontal Machining Centers to exacting tolerances from 6061 aluminum. The MPA produced buttstock includes an adjustable length of pull, recoil pad with height and cant adjustment, adjustable cheek riser and adjustable Monopod. The Monopod locks into vertical position and has a quick-height locating method, extending up to 5” with fine adjustment capabilities. When not in use, the Monopod tucks into the frame of the buttstock. The Monopod will also work at 60 degrees for when a shooter needs that “in between” height of the buttstock of the rifle in acquiring the target. It is coated in durable ceramic (Cerakote) and is available in a variety of colors. The upper night vision bridge provides a seat for a Picatinny rail with a matching rail mounted to the bottom of the chassis. The MPA BA SF Chassis comes with an A2 Pistol Grip, machined thumb notch, a handstop/barrier stop system (standard) and a built-in bubble level. User located side rails are available as an additional option. It also comes with a unique pocketing system that reduces weight and increases the structural integrity of the chassis. The side folding assembly is released by depressing a small, low profile button and locks in place folded against the shooter’s left side of the chassis body. For left handed shooters, the assembly can be reversed to allow the stock to fold to the right, opposite the bolt handle. The MPA Rotation Barricade stop has proven itself to be a “game changer” when used to engage barricade type states in long range competitions, locking the rifle into position for rock solid positional performance. Find out more at www.masterpiecearms.com.

FREEDOM ORDNANCE RELEASES NEW 9MM BELT-FED UPPER FOR ARS & M-16S

FREEDOM ORDNANCE RELEASES NEW 9MM BELT-FED UPPER FOR ARS & M-16S

Freedom Ordnance is now releasing their new FM-9 9mm Belt-Fed AR-15/M-16 Upper Receiver. The new upper offers a quick change barrel system that is rigid and accurate with no tools required to change barrels. You can literally switch barrels in seconds! The new upper uses Freedom Ordnance’s own proprietary disintegrating 9mm links that are designed especially for the 9mm cartridge, not modified military links. The upper is blow-back operated. The complete unit is machined from billet aluminum and ordnance grade steel. It is heat treated and features QPQ nitride finish on all steel parts to give the system extreme durability. The upper will drop on to any mil-spec AR-15 or M-16 lower receiver. A mag block is dropped into the mag well from the top before putting the upper on, this provides an attachment point for the belt bag and houses the ejector. Without the mag block in place, the unit will not function. This is the only “modification” that is done and no tools are required so M-16 lower owners don’t have to modify their precious lowers. It comes standard with the 16.5” barrel and the 11 inch barrel can be ordered as an option. It uses a supplied 150 round belt bag and also comes with 150 links. Extra links can be ordered in bags of 500 or 1000. Watch future issues of SAR for a test and review of this new belt-fed! For more information or to see a video of the new unit go to www.freedomordnance.com.